CableIQ Qualification Tester
Users Manual
Wire map: split pair
Wires connected to wrong pins at connector or punchdown block.
Wire map: reversed pairs
Wires connected to wrong pins at connector or punchdown block.
Wire map: crossed pairs
•
Wires connected to wrong pins at connector or punchdown block.
•
Mix of 568A and 568B wiring standards (12 and 36 crossed).
•
Crossover cables used where not needed (12 and 36 crossed).
Wire map: short
•
Damaged connector
•
Damaged cable
•
Conductive material stuck between pins at connector.
•
Improper connector termination
•
Wrong application for cable
74
-continued-