Table of Contents
Advertisement
A
The tester's beeper is silent for resistances above
about 5000 Ω. The beeper's tone and rhythm
increase as resistance decreases.
Pair 12 (green) on the 8-clip test lead. To change
B
the pair used for testing continuity, press
C
Resistance scale. This example shows about 2.3 k.
D
Press
K c
connector's shield and center conductor.
The continuity function works with a tone probe. See "Using
E
Pair.
J
the Continuity Toner" on page 54.
Figure 23. Testing for Continuity
Testing for Continuity
to test for continuity between the coaxial
avv37f.eps
53
Hide quick links:
Advertisement
Table of Contents
