Konica Minolta AeroDR System Operation Manual page 51

 AeroDR Generator Interface Unit2
• When the power switch of the AeroDR Inter-
face Unit is turned off, the power to the AeroDR
Generator Interface Unit2 is shut down, and the
LED (green) on the AeroDR Generator Interface
Unit2 will go off.
• When using the AC adapter, turn the power
switch of the AeroDR Generator Interface Unit2
off, and confirm that the LED (green) on the
AeroDR Generator Interface Unit2 goes off.
Power switch
 AeroDR Battery Charger
• When the power cable is removed from the wall
outlet, the power of the AeroDR Battery Charger
is turned off and the LED (green) is turned off.
LED (green)
LED (green)
LED (green)
 AeroDR Battery Charger2
• Turn the power switch of the AeroDR Battery
Charger2 off, and confirm that the LED (green)
is turned off.
LED (green)
 AeroDR Access Point
• When the power switch of the AeroDR Interface
Unit or AeroDR Interface Unit2 is turned off,
power supply to AeroDR Access Point is termi-
nated. The LED (umber) on the AeroDR Access
Point will turn off.
LED (umber)
 Access Point
Reference • ••• •• •• •• ••• •• •• •• •• ••• •• •• •• ••• • • • •
• When using a general-purpose access point, refer to its op-
eration manual.
• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• •• ••• •• •• • • • • •
 Image processing controller
• Turn the power switch of the image processing
controller off, and shutdown the image process-
ing controller.
51
3.1 Startup and shutdown
Power switch