Graco Reactor E-10 Instructions-Parts List Manual page 7

For spraying or dispensing 4:1 mix ratio materials, including epoxies, polyurethane foam, and polyurea coatings. not for use in explosive atmospheres

Hide thumbs Also See for Reactor E-10:

Table of Contents

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers and other body parts.

•

Keep clear of moving parts.

•

Do not operate equipment with protective guards or covers removed.

•

Pressurized equipment can start without warning. Before checking, moving, or

servicing equipment, follow the Pressure Relief Procedure in this manual. Dis-

connect power or air supply.

BURN HAZARD

Equipment surfaces and fluid that's heated can become very hot during operation.

To avoid severe burns, do not touch hot fluid or equipment. Wait until equip-

ment/fluid has cooled completely.

313221A

WARNING

Warnings

Table of Contents

Troubleshooting