Technical Data - Graco Reactor E-10 Instructions-Parts List Manual

Technical Data

Maximum fluid working
pressure
Electrical requirements
Generator Size (for Reac-
tor E-10 4:1only)
Maximum Fluid Tempera-
ture
Maximum Ambient Tem-
perature
Maximum Output
Output per Cycle (A side,
white fluid)
Output per Cycle (B side,
red fluid)
Overpressure Relief
Heater Power
Sound Pressure
Sound Power, per ISO
9614-2
Fluid Outlets
Air Outlet
Gun Compressed Air
Requirements
Weight (empty)
Wetted Parts
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
313221A
2000 psi (14 MPa, 140 bar)
Model 256765: 120 Vac, 1 phase, 50/60 Hz, 3500 W; requires three
separate, dedicated 15 A circuits
Heated: 5000 W minimum
160°F (71°C)
110°F (43°C)
12 lb/min (5.4 kg/min) at 340 cycles/min
0.00352 gal. (0.0133 liter)
0.00088 gal. (0.0033 liter)
Recirc/Spray valves automatically relieve excessive fluid pressure
back to supply tanks
120V models: 850 W each; 1700 W total
78.7 dB(A) in fast circulation mode
84.5 dB(A) at 2000 psi (14 MPa, 140 bar), 0.72 gpm (2.7 lpm)
88.6 dB(A) in fast circulation mode
94.4 dB(A) at 2000 psi (14 MPa, 140 bar), 0.72 gpm (2.7 lpm)
Component A (white fluid): 3/8 npt
Component B (red fluid): 1/4 npt
1/4 npsm(m)
Fusion Gun (purge air and operating air): 4 scfm (0.112 m
approximately 160 lb (72 kg), depending on model
Aluminum, stainless steel, carbon steel, brass, carbide, chrome,
chemically resistant o-rings, PTFE, ultra-high molecular weight poly-
ethylene
Technical Data
3
/min)
59