A-3-2 Functions That Were Added Or Changed For Each Unit Version - Omron NX701-1700 User Manual

Appendices
A-3-2 Functions That Were Added or Changed for Each Unit Version
This section describes the functions that were added or changed for each unit version of NX-series
CPU Unit.
 Additions and Changes to Functional Specifications
The following table gives the unit version of the CPU Units and the Sysmac Studio version for each
addition or change to the functional specifications.
Communi- Communications instructions
cations
SD Mem- Application
ory Cards
 Additions and Changes to Basic Instructions and Motion Control Instructions
The basic instructions and motion control instructions that you can use have increased or changed
for the new unit version of the CPU Unit.
For details, refer to the NJ/NX-series Instructions Reference Manual (Cat. No. W502) and
NJ/NX-series Motion Control Instructions Reference Manual (Cat. No. W508).
 Additions and Changes to Controller Events
The events that can occur have increased or changed for the new unit version of the CPU Unit.
There are also changes in the recovery methods to use when some errors occur.
For details, refer to the NJ/NX-series Troubleshooting Manual (Cat. No. W503).
 Additions and Changes to System-defined Variables
The system-defined variables that you can use have increased or changed for the new unit version
of the CPU Unit.
Refer to the NJ/NX-series CPU Unit Software User's Manual (Cat. No. W501) for details.
A - 8
Function
Program transfer from SD
Memory Card
Addi- Sysmac
Unit ver-
tion/c Studio
sion
hange version
Chang 1.11 1.15
e
Addi- 1.11 1.15
tion
NX-series CPU Unit Hardware User's Manual (W535)
Reference
NJ/NX-series
Instructions
Reference
Manual (Cat.
No. W502)
NJ/NX-series
CPU Unit Soft-
ware User's
Manual (Cat.
No. W501)