Omron NX701-1700 User Manual page 214

5 Troubleshooting
Event name Memory All Cleared
Meaning All of memory was cleared.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
A user with Administrator rights
cleared all of the memory.
Attached None
information
Precautions/ None
Remarks
Event name Event Log Cleared
Meaning The event log was cleared.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
The event log was cleared by the
user.
Attached Attached information 1: Cleared events 0:
information
Precautions/ None
Remarks
Event name Automatic Transfer Completed
Meaning The automatic transfer was completed.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
The automatic transfer was com-
pleted.
Attached None
information
Precautions/ None
Remarks
5 - 78
Source details
Information Recovery
--- Operation
Data type
---
Correction
---
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
All log categories were cleared
1: The system event log was cleared.
2: The access event log was cleared.
100: The user-defined event log was cleared.
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Event code 900B0000 hex
None Detection
timing
--- Log category
Operation returns to the factory state.
Name
---
Prevention
---
Event code 900C0000 hex
None Detection
timing
--- Log category
Not affected.
Name
---
Prevention
---
Event code 900F 0000 hex
None Detection
timing
--- Log category
Operation starts according to the Controller Configura-
tions and Setup data that was automatically transferred.
Name
---
Prevention
---
NX-series CPU Unit Hardware User's Manual (W535)
Commands from
user
Access
Commands from
user
Access
At power ON
System