Omron NX701-1700 User Manual page 217

Event name All Controller Errors Cleared
Meaning All current errors were cleared.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
The user cleared all current errors.
Attached None
information
Precautions/ None
Remarks
Event name Forced Refreshing Cleared
Meaning Clearing a forced refreshing value was specified.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
Clearing a forced refreshing value
was specified by the user.
Attached None
information
Precautions/ None
Remarks
Event name Backup Started
Meaning A backup operation was started.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
A backup operation was started.
Attached Attached information 1: Operation type
information
0101 hex: Controller to SD Memory Card for switch operation on front of CPU Unit
0102 hex: Controller to SD Memory Card for system variable operation
0103 hex: Controller to SD Memory Card for Sysmac Studio operation
0201 hex: Controller to computer
Precautions/ None
Remarks
NX-series CPU Unit Hardware User's Manual (W535)
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
5 Troubleshooting
Event code 90180000 hex
None Detection
timing
--- Log category
Clearing all errors for which the causes have been
removed.
Name
---
Prevention
---
Event code 90190000 hex
None Detection
timing
--- Log category
Forced refreshing values are cleared and operation is per-
formed according to the user program.
Name
---
Prevention
---
Event code 901A0000 hex
None Detection
timing
--- Log category
Not affected.
Name
---
Prevention
---
Commands from
user
Access
Commands from
user
Access
5
At start of backup
operation
System
5 - 81