Omron NX701-1700 User Manual page 84

3 Configuration Units
 Terminal Block
Terminal Appear
number ance
(1)
(2)
(3)
(4)
(5)
(6)
*1. For details, refer to 4-4-1 Power Supply Wiring on page 4-31.
*2. For details, refer to 4-4-2 Grounding on page 4-35.
*3. Details of the operation are given in the following table.
In operation (RUN mode).
The CPU Unit is starting (until entering the operating status that is
specified in the Startup Mode setting).
Operation stopped (PROGRAM mode).
Controller error in the major fault level occurred.
3 - 14
Name
NX-PA9001
Power sup-
Supply 100 to 240 VAC.
ply input
Ground to a resistance of 100 Ω or less to increase noise resistance and
LG
avoid electric shock.
GR
Ground to a resistance of 100 Ω or less to avoid electric shock.
RUN Out-
Turns ON when the CPU Unit is operating.
put
Status
Function
*1
Supply 24 VDC.
*2
*3
Operation
ON
OFF
NX-series CPU Unit Hardware User's Manual (W535)
NX-PD7001
*1
*2