Omron NX701-1700 User Manual page 157

Event code Event name
10340000 hex Error in Exe-
(Ver. 1.11 or cuting SD
later) Memory Card
Program
Transfer
40110000 hex PLC Function
Processing
Error
44420000 hex PLC Function
Processing
Error
40120000 hex PLC Function
Processing
Error
40130000 hex PLC Function
Processing
Error
10230000 hex Event Log
Save Error
10260000 hex Trace Set-
ting Transfer
Failure
NX-series CPU Unit Hardware User's Manual (W535)
Meaning Assumed cause
The SD Memory • It was not possible to read the
Card program data for SD Memory Card pro-
transfer ended in an gram transfers.
error.
• The SD Memory Card was
removed during a SD Memory
Card program transfer.
• There are no backup files in
such a folder on the SD Mem-
ory Card as specified by the
_Card1PrgTransferCmd.Dir-
Name system-defined variable.
• The backup files in such a
folder on the SD Memory Card
as specified by the _Card1Prg-
TransferCmd.DirName system-
defined variable are corrupted.
• The SD Memory Card is dam-
aged.
A fatal error was • An error occurred in the soft-
detected in the PLC ware.
Function Module.
A fatal error was • An error occurred in the soft-
detected in the PLC ware.
Function Module.
A fatal error was • An error occurred in the soft-
detected in the PLC ware.
Function Module.
A fatal error was • An error occurred in the soft-
detected in part of ware.
the PLC Function
Module.
Saving the event • A low battery voltage prevented
log failed. retention of memory during a
power interruption. (NJ/NX-
series)
• A forced shutdown was per-
formed. (NY-series)
• Data in the event log area are
invalid. (NY-series)
• Data in the NX Unit event log
area are invalid. (NX1P2 CPU
Unit)
The power supply • The power supply was inter-
was interrupted rupted while transferring the
while transferring trace settings.
the trace settings.
5 Troubleshooting
Level
Maj Prt Min Obs Info
S page 5-57
S page 5-58
S page 5-58
S page 5-59
S page 5-59
S page 5-60
S page 5-60
Reference
5
5 - 21