Introduction
1.2 Operator panel fronts
1.2
Operator panel fronts
1.2.1
Overview
Introduction
The display (screen) and operation (e.g. hardkeys and softkeys) of the SINUMERIK Operate
user interface use the operator panel front.
In this example, the OP 010 operator panel front is used to illustrate the components that are
available for operating the controller and machine tool.
Operator controls and indicators
1
2
3
4
5
24
Status LED: POWER
Status LED: TEMP
(illuminated LEDs indicate increased wear)
Alphabetic key group
Numerical key group
Softkeys
(5)
(5)
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Turning