Drilling With Manual Machine - Siemens SINUMERIK 840D sl Operating Manual

Working with Manual Machine
14.6 More complex machining
14.6.1

Drilling with Manual Machine

The same range of technological functions (cycles) is available as in automatic mode for
drilling on the face or peripheral surface of a workpiece:
Parameters
The parameters of the input screen forms correspond to the parameters under Automatic
(see Section "Drilling (Page 277)").
718
Machine manufacturer
Please refer to the machine manufacturer's specifications.
⇒ ⇒
⇒
⇒
⇒
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Turning