Programming Example: Machining Main Spindle - Transfer Workpiece - Machining; Counterspindle; Programming Example: Machining, Counterspindle - Without Previous Transfer - Siemens SINUMERIK 840D sl Operating Manual

Programming technology functions (cycles)
8.7 Additional cycles and functions in ShopTurn
8.7.17.1 Programming example: Machining main spindle – Transfer workpiece – Machining

counterspindle

The programming for this operation might look like this:
Programming steps - alternative 1:
● Machining, main spindle
● Gripping
● Withdrawing
● Rear face
● Machining, counterspindle
Programming steps - alternative 2:
● Machining, main spindle
● Complete (gripping, withdrawing and rear face)
● Machining, counterspindle
8.7.17.2

Programming example: Machining, counterspindle - without previous transfer

Programming steps
● Rear face
● Machining, counterspindle
518
5. Press the "Teach park pos." softkey.
The actual tool park position is saved.
6. Press the "Teach angl. offset" softkey.
The actual angular difference between the main and counter spindles
will be saved.
– Work offset
Work offset is only activated
– ZV:
Parameter is not evaluated.
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Turning