Siemens SINUMERIK 840D sl Operating Manual page 412

Programming technology functions (cycles)
8.4 Milling
Procedure
Parameters, G code program
PL Machining plane
Milling direction
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
Machining
Face C
•
surface
Face Y
•
Peripheral surface C
•
(only for
Peripheral surface Y
•
ShopTurn)
Position
At the front (face)
•
At the rear (face)
•
Outside (peripheral surface)
•
(only for
ShopTurn)
Inside (peripheral surface)
•
Clamp/release spindle (only for end face Y/peripheral surface Y)
The function must be set up by the machine manufacturer.
(only for
ShopTurn)
412
1. The part program or ShopTurn program to be processed has been
created and you are in the editor.
2. Press the "Milling" softkey.
3. Press the "Groove" and "Circumferential groove" softkeys.
The "Circumferential Groove" input window opens.
mm
mm
*
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
mm/min
mm/tooth
rpm
m/min
Unit
Turning