Siemens SINUMERIK 840D sl Operating Manual page 658

Managing programs
12.9 Copying and pasting a directory/program
Procedure
658
1. Select the "Program manager" operating area.
2. Choose the desired storage location and position the cursor on the file
or directory which you would like to copy.
3. Press the "Copy" softkey.
4. Select the directory in which you want to paste your copied
directory/program.
5. Press the "Paste" softkey.
If a directory/program of the same name already exists in this directory,
you are are informed. You are requested to assign a new name,
otherwise the directory/program is assigned a name by the system.
If the name contains illegal characters or is too long, a prompt will
appear for you to enter a permissible name.
6. Press the "OK" or "Overwrite all" softkey if you want to overwrite
existing directories/programs.
- OR -
Press the "No overwriting" softkey if you do not want to overwrite
already existing directories/programs.
- OR -
Press the "Skip" softkey if the copy operation is to be continued with the
next file.
- OR -
Enter another name if you want to paste the directory/program under
another name and press the "OK" softkey.
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Turning