Siemens SINUMERIK 840D sl Operating Manual page 136

Machining the workpiece
4.8 Controlling the program run
Skip levels, activate
Select the corresponding checkbox to activate the desired skip level.
Note
The "Program Control - Skip Blocks" window is only available when more than one skip level
is set up.
Procedure
136
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
3 Press the "Prog. ctrl." and "Skip blocks" softkeys.
The "Program Control" window appears and shows a list of skip levels.
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Turning