Siemens SINUMERIK 840D sl Operating Manual page 174

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Machining the workpiece

4.15 Setting for automatic mode

Programming Manual Measuring Cycles / 840D sl/828D

The feedrate can be changed while the operation is running.

Enter the desired percentage in the "Reduced rapid traverse RG0" field.

RG0 has not effect if you do not change the specified amount of 100%.

Enter "Automatic" in the "Display measurement result" box if the

measurement result window should be automatically opened, or

"Manual", if the measurement result window should be opened by

pressing the "Measurement result" softkey.

Operating Manual, 03/2013, 6FC5398-8CP40-3BA1

Sinumerik 828d turning