Programming technology functions (cycles)
8.4 Milling
Procedure
Parameters, G code program
PL
Machining plane
Milling direction
RP
Retraction plane
SC
Safety clearance
F
Feedrate
Parameter
Description
Machining
Face C
•
surface
Face Y
•
(only for
ShopTurn)
Position
Front
•
back
•
(only for
ShopTurn)
Clamp/release spindle (only for face Y)
The function must be set up by the machine manufacturer.
(only for
ShopTurn)
402
1.
The part program or ShopTurn program to be processed has been
created and you are in the editor.
2.
Press the "Milling" softkey.
3.
Press the "Multi-edge spigot" and "Multi-edge" softkeys.
The "Multi-edge" input window opens.
mm
mm
*
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant
cutting rate
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
mm/min
mm/tooth
rpm
m/min
Unit
Turning