Relocating A Multitool - Siemens SINUMERIK 840D sl Operating Manual

Reactivating and positioning
When the "Reactivate with positioning" function is configured, then also the magazine
location at which the selected multitool is located, is positioned to the loading point. You can
exchange the multitool.
Reactivation of all monitoring types
When the "Reactivation of all monitoring types" function is configured, all the monitoring
types set in the NC for a tool are reset during reactivation.
References
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
11.16.8

Relocating a multitool

Multitools can be directly relocated within magazines to another magazine location, which
means that you do not have to unload multitools with the associated tools from the magazine
in order to relocate them to a different location.
When you are relocating a multitool, the system automatically recommends an empty
location. You may also directly specify an empty magazine location.
Procedure
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Magazine" softkey.
3. Position the cursor at the multitool that you wish to relocate to a
different magazine location.
4. Press the "Relocate" softkey.
The "... relocate from location ... to location ..." window is
displayed. The "Location" field is pre-assigned with the number of
the first empty magazine location.
5. Press the "OK" softkey to relocate the multitool to the
recommended magazine location.
OR -
11.16 Working with multitool (only 840D sl)
Tool management
633