Remove And Replace A Dap (If A New Dap Is Available); Nn43120-123 01.07 6 January - Nortel CS 1000 User Manual

6
7
8
9
10
11
12
13

Remove and replace a DAP (if a new DAP is available)

To ensure that the newly installed DAP behaves in the same way as the
replaced DAP, use the steps in the next procedure to replace a DAP.
Copyright © 2008-2009 Nortel Networks
.
Remove and replace a DAP (if a new DAP is available) 217
Click Apply.
Click Save system.
Click Activate/Deactivate/System status.
Ensure the DHCP and TFTP servers are running.
Click Reboot to restart the DAPs.
Enter the following URL in an internet browser:
localhost/cds.
The DAP Manager appears.
In the Main panel, click Access Points.
The Access Points page appears.
On the Access Points page, ensure the new firmware (Package
ID) is uploaded successfully.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
--End--