Genie Z45/25J Operator's Manual page 5

Self-propelled servicing platform
Hide thumbs Also See for Z45/25J:
Table of Contents

Advertisement

Second Edition • Fifth Printing
Electrocution Hazards
This machine is not electrically insulated and will
not provide protection from contact with or
proximity to electrical current.
Maintain safe distances from electrical power lines
and apparatus in accordance with applicable
governmental regulations and the following chart.
Voltage
Phase to Phase
0 to 300V
300V to 50KV
50KV to 200KV
200KV to 350KV
350KV to 500KV
500KV to 750KV
750KV to 1000KV
Allow for platform movement, electrical line sway or
sag and beware of strong or gusty winds.
Keep away from the machine if it contacts
energized power lines. Personnel on the ground or
in the platform must not touch or operate the
machine until energized power lines are shut off.
Do not operate the machine during lightning or
storms.
Do not use the machine as a ground for welding.
Part No. 114047
Minimum Safe
ApproachDistance
Feet
Meters
Avoid Contact
10
3.1
15
4.6
20
6.1
25
7.6
35
10.7
45
13.7
Self-Propelled Servicing Platform
Tip-over Hazards
Occupants, equipment and materials shall not
exceed the maximum platform capacity or the
maximum capacity of the auxiliary platform (if
equipped). Weight in the auxiliary platform (if
equipped) is part of the total platform load.
Maximum capacity
Main platform without
auxiliary platform
Main platform with auxiliary
platform unoccupied
Auxiliary platform
Maximum occupants
Main platform without auxiliary platform
Main platform with auxiliary platform stowed
Main platform with auxiliary platform occupied
Auxiliary platform
The weight of options and accessories, such as
pipe cradles, panel cradles and welders, will reduce
the rated platform capacity and must be factored
into the total platform load. See the decals on the
options.
Do not raise or extend the boom unless the
machine is on a firm, level surface.
Do not depend on the tilt alarm as a level indicator.
The tilt alarm sounds in the platform only when the
machine is on a severe slope.
Operator's Manual
SAFETY RULES
500 lbs
227 kg
500 lbs
227 kg
300 lbs
136 kg
2
2
1
1
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents