Genie Z45/25J Operator's Manual page 34

Operator's Manual
TRANSPORT AND LIFTING INSTRUCTIONS
Securing to Truck or Trailer for
Transit
Always chock the machine wheels in preparation
for transport.
Turn the key switch to the off position and remove
the key before transporting.
Inspect the entire machine for loose or unsecured
items.
Be sure the auxiliary platform is fully stowed all
retaining pins are in place. See Operating
Instructions section.
Be sure the engine side chassis cover is latched.
Be sure the worklights are secured in the clamps
with zip ties or removed from the clamps and
secured to the platform floor.
Securing the Chassis
Use the tie points on the drive chassis for
anchoring down to the transport surface.
Use chains or straps of ample load capacity.
Use a minimum of 4 chains.
Adjust the rigging to prevent damage to the chains.
32
Securing the Platform - Z-45/25J
Make sure the jib and platform are in the stowed
position.
Secure the platform with a nylon strap placed over
the platform mount near the platform rotator (see
below). Do not use excessive downward force
when securing the boom section.
Self-Propelled Servicing Platform
Second Edition • Fifth Printing
Part No. 114047