Genie Z45/25J Operator's Manual page 18

Operator's Manual
MAINTENANCE
Check the Engine Oil Level
Maintaining the proper engine oil level is essential
to good engine performance and service life.
Operating the machine with an improper oil level
can damage engine components.
Check the oil level with the
engine off.
1 Check the oil level dipstick. Add oil as needed.
Result: The oil level should be at the
on the dipstick.
Kubota Engine Z482-E
Oil viscosity requirements
Engine oil should have properties of API classification
CC/SE, CD/SE, CC/SF or CD/SF grades. Units ship
with 10W-40 SG/CC
Check the Engine Coolant Level
Maintaining the engine coolant at the proper level is
essential to engine service life. Improper coolant
level will affect the engine's cooling capability and
damage engine components. Daily checks will
allow the inspector to identify changes in coolant
level that might indicate cooling system problems.
1 Check the fluid level in the coolant recovery
tank. Add fluid as needed.
Result: The fluid level should be at the
mark.
FULL
Coolant specification
16
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
1 Be sure the boom is in the stowed position, then
mark
FULL
10W-30 Hydraulic oil specifications
Hydraulic oil type
Scheduled Maintenance
The scheduled maintenance items must be
completed by a person trained and qualified to
perform maintenance on this machine according to
the procedures found in the service manual for this
machine.
Machines that have been out of service for more
than three months must receive the quarterly
inspection before placing the machine back into
service.
50%/50%
water and coolant
Self-Propelled Servicing Platform
Second Edition • Fifth Printing
visually inspect the oil level in the hydraulic
tank.
Result: The hydraulic oil level should be within
the and marks on the hydraulic tank.
FULL ADD
Mil-5606H
Mil-83282D
Part No. 114047