Viewing The Media Gateway Trap Managers Table - Avaya C360 Manager User Manual

Viewing the Media Gateway Trap Managers
Table
To view the Trap Managers table for a G700 Media Gateway:
* Note: Each G700 Media Gateway module has its own Trap
The Media Gateway Trap Managers table is used to configure the IP
addresses of the trap managers and their trap reporting statuses for Media
Gateway traps. Traps include power, fan, faults, module insert/remove,
and voice related traps.
To enable RTP QoS traps on the Media Gateway module, check the
RTP QoS traps
module, uncheck the
Avaya C360 Manager User Guide
1. Select the G700 Media Gateway for which you want to view the
Trap Managers table.
Managers table, which can be used to configure IP addresses
and trap managers for the specific module. Device wide trap
settings do not apply to traps from G700 Media Gateways in
the device.
2. Click .
Or
Select
Configure > Trap Managers
Managers table opens.
Figure 14-3. Media Gateway Trap Managers Table
checkbox. To disable frame relay traps on the Media Gateway
Enable RTP QoS traps
Trap Managers Configuration
. The Media Gateway Trap
checkbox.
Enable
189