Avaya C360 Manager User Manual page 132

Chapter 7
To modify the parameters of a Frame Relay sub-interface:
To delete a Frame Relay sub-interface:
* Note: You can only delete Frame Relay sub-interfaces on which no
The following table provides a list of the fields in the Sub-Interfaces tab of
the USP dialog box and their descriptions:
118
2. Enter the parameters for the Frame Relay sub-interface using the
fields at the bottom of the dialog box.
3. Click Apply . The Frame Relay sub-interface is created.
1. Click the Frame Relay sub-interface you want to modify. The
configuration parameters of the selected sub-interface appear in
the bottom of the dialog box.
2. Modify the parameters you want to change using the fields at the
bottom of the dialog box.
3. Click . The Frame Relay sub-interface parameters are
Apply
modified.
1. Click the Frame Relay sub-interface you want to delete.
IP interfaces are defined.
2. Click . A confirmation dialog box opens.
Delete
3. Click Yes .
4. Click . The Sub-Frame-Relay interface is deleted.
Apply
Table 7-12. USP Dialog Box - Sub-Interfaces Parameters
Field
Name
Description
Type
Bandwidth
Description
The name of the Sub-Frame-Relay interface.
A user defined description of the
Sub-Frame-Relay.
The type of Frame Relay sub-interface.
Currently, only Point-to-Point interfaces are
supported.
The bandwidth of the Sub-Frame-Relay
interface in bits per second.
Avaya C360 Manager User Guide