Dhcp/Bootp Parameters - Avaya C360 Manager User Manual
Integrated management 3.0
Hide thumbs
Also See for C360 Manager:
- Installation and configuration manual (248 pages) ,
- Quick start for hardware installation (36 pages) ,
- Quick start for hardware installation (34 pages)
Table of Contents
Advertisement
Chapter 20
DHCP/BOOTP Parameters
To display and update DHCP/BOOTP parameters, select
DHCP/BOOTP Parameters
The following parameters are displayed:
232
Figure 20-8. DHCP/BOOTP Parameters Window
Table 20-6. DHCP/BOOTP Parameters
Field
VLAN Name
(not for X330WAN)
L2 Interface Name
(X330WAN router
only)
Server1 Address
Server2 Address
. The DHCP/BOOTP Parameters window opens.
Description
The interface name upon which the clients are
located.
The interface name upon which the clients are
located.
The IP address of the first of two possible DHCP
servers for the interface.
The IP address of the second of two possible
DHCP servers for the interface.
IP Route > DHCP >
Avaya C360 Manager User Guide
Advertisement
Table of Contents
