Avaya C360 Manager User Manual page 259

The following parameters are displayed:
The parameters in the OSPF Link State Database window are read-only.
You can limit the table entries displayed. To start the display of entries
from a specified interface and IP address:
Avaya C360 Manager User Guide
Table 20-12. OSPF Link State Database Window
Field
LSA Type
LSA ID
Router ID
Sequence No.
LSA Age
Checksum
1. Click .
Or
Select Action > Start Point
Figure 20-15. OSPF Link State Database Start Point Dialog Box
2. Select an LSA Type from the
Description
The type and format of the link state
advertisement; for example, Router links and
Network links.
Identifies the part of the routing domain that is
described by the advertisement. The LSA ID can
be either a router ID or an IP address.
Identifies the originating router in the
autonomous system.
The sequence number of the link state
advertisement. Use this parameter to detect old
and duplicate link state advertisements. The
larger the sequence number, the more recent
the advertisement. Note that the sequence
number is usually negative.
The age of the link state advertisement (in
seconds).
This parameter is a checksum of the complete
contents of the advertisement, not including the
Age value.
. The Start Point dialog box opens.
listbox.
LSA Type
IP Route
245