Avaya C360 Manager User Manual page 64

Chapter 3
The following table provides a list of the fields in the LLDP tab of the Port
Configuration dialog box and their descriptions:
50
Table 3-9. Port Configuration Fields - LLDP Tab
Field
LLDP Admin Status
LLDP TLVs
Transmission
Description
The status of LLDP mode on the device.
Possible values are:
• Tx Only - LLDP mode is enabled, and is
configured to only accept Tx traffic.
• Rx Only - LLDP mode is enabled, and is
configured to only accept Rx traffic.
• Tx and Rx - LLDP mode is enabled, and
is configured to accept both Tx and Rx
traffic.
• Disabled - LLDP mode is disabled.
• N/A - LLDP mode is not supported for
this port.
The optional type length values advertised by
the device. Possible values include:
• System Name.
• System Description.
• System Capabilities.
• Port Description.
• Management Address.
Selecting the checkbox instructs the device to
advertise the indicated TLV. Leaving the
checkbox blank instructs the device not to
display the indicated TLV.
Chassis ID and Port ID are not displayed as
advertising their values is mandatory when
LLDP is enabled.
Avaya C360 Manager User Guide