Avaya C360 Manager User Manual page 244

Chapter 20
You can create or delete ARP table entries. For more information on
editing tables, refer to
You can limit the table entries displayed. To start the display of entries
from a specified interface and IP address:
To view all the entries in the ARP Table:
230
Table 20-4. ARP Parameters (Continued)
Field
Status
1. Click .
Or
Select Action > Start Point
Figure 20-6. ARP Table Start Point Dialog Box
2. Enter an IP address in the
3. Select an interface from the
4. Click . The ARP Table displays entries starting with the specified
OK
IP address and interface.
Click .
Or
Select
View > Refresh
Description
The status of the interface. Possible status values
are:
• Dynamic - The entry is learned from the
ARP protocol. If the station entry is not
active for a predetermined time, the entry
is deleted from the table.
• - The entry has been configured by
Static
the network management station and is
permanent.
• - The entry in the table is invalid.
Invalid
"Editing Tables" on page
. The Start Point dialog box opens.
IP Address field.
listbox.
If Name
. All entries appear in the table.
213.
Avaya C360 Manager User Guide