Installing The Acm Gateway; Overview; Installing Voicemail Pro As An Acm Gateway - Avaya IP Office Voicemail Pro Installation And Maintenance Manual

Installing the ACM Gateway

Overview

The ACM Gateway option of the Voicemail Pro Installation installs the Voicemail Pro Server and Client
for use with a G150 branch office gateway. For installation instructions see Installing the ACM Gateway.
For information about setting up such a system, including aspects of voicemail, see the separate Avaya
G.150 documentation.

Installing Voicemail Pro as an ACM Gateway

Complete the steps in this section to install Voicemail Pro as an ACM Gateway. There is only one type of
installation for the Voicemail Pro ACM Gateway. Therefore you are not offered the choice of custom,
compact or typical during the installation process.
To install the ACM Gateway:
1. Insert the IP Office Voicemail Pro CD. The installation should auto-start. If it does not auto-start,
click Browse to locate Setup.exe on the CD and then run it. The Choose Setup Language
window is displayed.
2. Select the installation language.
This language is used for the installation and for the default language prompts.
3. Click OK.
Installation preparation begins.
4. Voicemail Pro requires Microsoft .NET 1.1 Framework. If this version is not detected, you are
prompted to install it. Click Yes to install Microsoft .NET 1.1 Framework and follow the
instructions on the screen.
If the following window is displayed, Voicemail Pro is already installed. You need to upgrade rather
than install a new version. For more information, see Upgrading a Voicemail Pro System.
Voicemail Pro Installation and Maintenance Guide
IP Office
Installing the ACM Gateway
15-601063 Issue 15b (31 May 2006)
Page 39