Avaya C360 Manager User Manual page 76

Chapter 5
MGP Config
The MGP Config tab provides hardware information about the Media
Gateway Processor. In addition, the MGP Config tab is used to configure
IP, VLAN, and QoS parameters.
General
The upper section of the MGP Config tab provides general information
about a specific Media Gateway Processor.
The following table lists the General fields and their description.
62
Table 5-2. MGP Config Tab - General Parameters
Field
MG Identifier
MAC address
FW version
Figure 5-2. MGP Config Tab
Description
The ID of the MG that helps link the C360
module's port identification with the G700
Media Gateway's port identification.
The MAC address of the media gateway
processor.
The firmware version of the media gateway
processor.
Avaya C360 Manager User Guide