Avaya C360 Manager User Manual page 87

QoS
QoS can be controlled either locally or remotely. If control is local, it is
possible to configure QoS, RTCP, and RSVP parameters. If control is
remote, QoS parameters are determined by the MGC.
The following table lists the QoS fields and their descriptions.
Avaya C360 Manager User Guide
Table 6-1. VoIP resources - General Parameters (Continued)
Field
RTP port Max
Table 6-2. VoIP resources - QoS Parameters
Field
QoS Control
802 Priority
EF DSCP
BBE DSCP
Description
The maximum range of UDP ports assigned by
the call controller for RTP traffic. The value
ranges between 3 - 65535.
Description
The source of QoS control. This parameter can
only be changed via the CLI. Possible values are:
• Local - The processor uses the local QoS
parameters. If the processor is using the
local QoS parameters, the
DSCP , and BBE DSCP
configured.
• Remote - The processor receives its QoS
parameters from the Media Gateway
Controller. All QoS parameters are Read-
only.
Priority based on a CoS standard which assigns
rights and privileges to users of a telephony
network. Possible values are 0 - 7.
A type of differentiated service used to provide
guaranteed bandwidth across a network.
If sufficient bandwidth is available, the
Expedited Forwarding class can be used.
The values range are 0 - 63.
A DiffServ class which is used per call to achieve
the greatest possible bandwidth. The values
range between 0 - 63.
VoIP Engine Configuration
,
802 Priority EF
fields can be
73