Avaya C360 Manager User Manual page 175

The following table provides a list of the fields in the Port Redundancy
dialog box and their descriptions:
To configure the device's port redundancy configuration:
Avaya C360 Manager User Guide
Table 11-1. Port Redundancy Fields - 802.1x Tab
Field
Name
Primary
Secondary
Intermodule
Switch Over (sec)
Switch Back
Redundancy Mode
1. Enter an amount in the
2. Select one of the
3. If you selected
After
switch back in the
Description
The name of the port redundancy.
The primary port of the port redundancy pair.
The secondary port of the port redundancy
pair.
If checked, the port redundancy is an
intermodule port redundancy. If not checked,
the port redundancy is not an intermodule
port redundancy.
The minimum time between switching
between the ports in a port redundancy pair.
The amount of time after the primary port
link is reestablished after which the primary
port takes over from the secondary port.
Possible values include:
• Disabled - The primary port does not
take over from the secondary port.
• Immediately - The primary port takes
over from the secondary port as soon as
the primary port link is reestablished.
• After x sec- The primary port takes over
from the secondary port x seconds after
the primary port link is reestablished.
State of Port Redundancy on the Avaya C360
device. Possible values are:
• Enabled - Port Redundancy is enabled
on this device.
• Disabled - Port Redundancy is not
enabled on this device.
Switch Over field.
option buttons.
Switch Back
x , enter the number of seconds for the
sec
x field.
After sec
Port Redundancy
161