Planning The System - Bosch ICP-MAP5000-2 Installation Manual

Map 5000 series main panel intrusion alarm system
Hide thumbs Also See for ICP-MAP5000-2:
Table of Contents

Advertisement

6
en | Introduction
Danger!
Electric shock
Danger of electric shock if live parts are touched. The alarm system is designed for an IT-
power distribution system (230 V). Switch off the power supply of the alarm system before
carrying out maintenance or installation work.
1.5

Planning the system

MAP control panel enclosure kit
The ICP-MAP0111 panel enclosure kit is the main system enclosure. This enclosure is designed
to contain the following components:
Use the ICP-MAP0120 expansion enclosure kit when the system requirements for power and /
or other remote devices exceed the capacity provided by the ICP-MAP0111 panel enclosure
6.
kit
MAP expansion enclosure kit
The ICP-MAP0120 expansion enclosure kit is designed to contain the following components:
Use the ICP-MAP0115 power enclosure kit when system power requirements exceed the
power capacity of the ICP-MAP0111 panel enclosure kit
MAP power enclosure kit
The ICP-MAP0115 power enclosure kit is designed to contain the following components:
1
This module mounts on the ICP-MAP0025 hinged mounting plate.
2
This module mounts on the ICP-MAP0020 accessory mounting plate, which mounts to the
back of the enclosure.
2016.06 | 17 | F.01U.168.332
Because the panel is permanently connected equipment, a readily accessible disconnect
device must be included into the building installation wiring.
ICP-MAP5000 main panel
ICP-MAP0007 DE module
ICP-MAP0010 LSN gateway
ICP-MAP0012 CAN splitter
2
AT 2000 communicator
IPP-MAP0005 power supply
ICP-MAP0065 AC terminal block
ICP-MAP0050 control panel enclosure tamper switch
Two batteries (maximum 45 Ah each)
IPP-MAP0005 power supply
ICP-MAP0010 LSN gateway
ICP-MAP0012 CAN splitter
ICP-MAP0065 AC terminal block
ICP-MAP0055 expansion enclosure tamper switch
Two batteries (maximum 18 Ah each)
IPP-MAP0005 power supply
ICP-MAP0065 AC terminal block
ICP-MAP0050 control panel enclosure tamper switch
Four batteries (maximum 40 Ah each)
1
1
1
1
3
4
3
5
1
4
3
4
Installation manual
6
.
Bosch Sicherheitssysteme GmbH
MAP 5000

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icp-map5000-com

Table of Contents