Bosch ICP-MAP5000-2 Installation Manual page 73

MAP 5000
1.
2.
AE 4 Access for manufacturers via RPS for MAP
1.
2.
3.
4.
Functions of the access levels
The assignment of the functions to the access levels 2 and 3 can be adapted in RPS.
Further subdivisions are possible within the access levels if the owner wishes to grant the
users different permissions: User Manager > Permission Sets
General permissions
May silence buzzer on control center
May change own user passcode
May transmit/receive programming with RPS
May receive history with RPS
May perform diagnostics with RPS
May perform software updates with RPS
Operations category permissions
May disable device
May enable device
May turn chime on/off
May change schedule
May edit blocking time
User category permissions
May add user
May delete user
May change user passcode
Event category permissions
May clear internal alarm
May clear external alarm
Bosch Sicherheitssysteme GmbH
Open control panel enclosure.
or
authorize from RPS with an AE 2 user with corresponding permissions (control center:
main menu page 2 > RPS).
Establish a connection between the panel and RPS.
Authorize the manufacturer user with an AE 2 user with corresponding permissions
(control center: main menu page 1 > maintenance page 3 > manufacturer permission).
Open control panel enclosure.
Switch to installer mode = AE 3 (Installer button, page 67).
Login with the passcode of the manufacturer at the installer control center (Manufacturer
authorization, page 60).
Establish a connection between the panel and RPS.
Installation manual
Appendices | en
Access level
1 2 3
X X
X X
X
X
X
X
1 2 3
X
X
X X
X X
X X
1 2 3
X X
X X
X X
1 2 3
X X
X X
2016.06 | 17 | F.01U.168.332
73
4
X
X
4
4
4