Parameterization; Structure Of The Parameter Lists, Parameterization With Drivemonitor - Siemens 6SE7011-5EP60 Operating Instructions Manual

05.2003
NOTE
8.3.3

Parameterization

8.3.3.1

Structure of the parameter lists, parameterization with DriveMonitor

Field Field Name
No.
1 P. Nr
2 Name
3 Ind
4 Index text
5 Parameter
value
6 Dim
Siemens AG 6SE7087-6JP60
SIMOVERT MASTERDRIVES
www.aotewell.com
If no connection with the device can be established because the device
does not physically exist or is not connected, you can perform offline
parameterization. First switch to offline mode. In this mode, you can
edit the parameter data set on the basis of the factory setting. In that
way, you can create an individually adapted download file, which you
can load into the device later.
Parameterization using the parameter list is basically the same as
parameterization using PMU (See Section 8.4). The parameter list
provides the following advantages:
♦ Simultaneous visibility of a larger number of parameters
♦ Text display for parameter names, parameter value, binectors, and
connectors
♦ On a change of parameters: Display of parameter limits or possible
parameter values
The parameter list has the following structure (see Fig. 8-8):
Function
Here the parameter number is displayed. You can only change the field in
menu Free parameterization.
Display of the parameter name, in accordance with the parameter list
Display of the parameter index for indexed parameters. To see more than
index 1, click on the [+] sign. The display is then expanded and all indices of
the parameter are displayed
Meaning of the index of the parameter
Display of the current parameter value. You can change this by double-
clicking on it or selecting and pressing Enter.
Physical dimension of the parameter, if there is one
Operating Instructions
sales@aotewell.com
Industry Automation
Parameterization
8-15
+86-755-8660-6182