Installation
Installing the
optional board
NOTICE
Slot A
Slot B
Slot C
5-6
www.aotewell.com
Optional boards can only be inserted in slot A and slot B. Slot C of the
unit is permanently pre-assigned for the terminal module EBV.
Push the optional board from behind into the opening on the front cover
(
) until the position of the 64-pole system connector on the main
board corresponds with the position of the socket.
Insert the optional board from the right onto the 64-pole system
connector on the main board (
Screw the optional board tight at the fastening points in the front section
of the optional board (
Fig. 5-6
Installing the optional board
sales@aotewell.com
). The view shows the installed state.
).
Slot A
Slot B
Slot C
6SE7087-6JP60
Operating Instructions
Industry Automation
05.2003
Siemens AG
SIMOVERT MASTERDRIVES
+86-755-8660-6182