Drive Window/Parameter List - Siemens 6SE7011-5EP60 Operating Instructions Manual

Parameterization
2
8-14
www.aotewell.com
After you have confirmed the drive settings with ok, you can still specify
the name and the storage location of the download file to be created.
After that, the parameter list opens in offline mode (Fig. 8-8).
With buttons Offline, Online (RAM), Online (EEPROM) (Fig. 8-8 [1]) you
can switch modes. When you switch to online mode, device
identification is performed. If the configured device and the real device
do not match (device type, software version), an alarm appears. If an
unknown software version is recognized, the option of creating the
database is offered. (This process takes several minutes.)
Fig. 8-8

Drive window/parameter list

The DriveMonitor drive window has a directory tree for navigation
purposes (Fig. 8-8 [2]). You can deselect this additional operating tool
in menu View.
The drive window contains all elements required for the
parameterization and operation of the connected device. In the lower
bar, the status of the connection with the device is displayed:
Connection and device ok
Connection ok, device in fault state
Connection ok, device in alarm state
Device is parameterized offline
No connection with the device can be established (only offline
parameterization possible).
sales@aotewell.com
1
Operating Instructions
Industry Automation
05.2003
6SE7087-6JP60 Siemens AG
SIMOVERT MASTERDRIVES
+86-755-8660-6182