Copy Features - Panasonic DP-MB311EU Operating Instructions Manual

10. Programmable Features

10.1.3 Copy features

Feature
Input tray setting
for copy
Default copy
resolution
Page layout hold
Zoom hold
Collate hold
Duplex hold
Edge hold
Frame margin
Margin hold
80
Code Selection
#460 To set the input tray to use for copy.
M1N "#1" (default): Standard input tray
M2N "#2": Multi-purpose tray
M3N "#3": Lower input tray
M4N "#1+#2+#3", "#1+#2", "#1+#3" or "#2+#3"
*1 These options are displayed only when the paper size (feature #380 on
page 71, feature #381 on page 71 or feature #382 on page 72) and the media
type (feature #383 on page 72, feature #384 on page 72 or feature #385 on
page 72) match. If either is changed, this setting will be changed accordingly.
#461 To change the default resolution setting for copying.
M1N "TEXT/PHOTO" (default): For documents containing both text and
photographs.
M2N "TEXT": For documents containing only text.
M3N "PHOTO": For documents containing photographs, shaded drawings, etc.
Note:
R "HIGH-RES" (page 45) cannot be selected as the default setting.
#467 To hold the previous page layout setting.
M0N "DISABLED" (default)
M1N "ENABLED"
#468 To hold the previous zoom setting.
M0N "DISABLED" (default)
M1N "ENABLED"
#469 To hold the previous collate setting.
M0N "DISABLED" (default)
M1N "ENABLED"
#470 To hold the previous duplex setting.
M0N "DISABLED" (default)
M1N "ENABLED"
Note:
R When this feature is activated, it will be effective for the following:
– When making 1-sided originals into 2-sided copies (page 47).
– When making 2-sided originals into 2-sided copies (page 47).
R Even if this feature is activated, it will not be effective when making 2-sided
originals into 1-sided copies (page 47).
R When making 2-sided originals into 2-sided copies, the original document
settings will be reset even if this feature is activated. See step 2 to 4 on
page 47 to change the setting again.
#473 To hold the previous edge setting.
M0N "DISABLED" (default)
M1N "ENABLED"
#474 To set the frame margin. When "ENABLED" is selected, your copies will be
automatically reduced according to the margin setting. However, if you change
the zoom rate (page 46), your copies will not be automatically reduced.
M0N "DISABLED" (default)
M1N "ENABLED"
#475 To hold the previous margin setting.
M0N "DISABLED" (default)
M1N "ENABLED"
*1