Panasonic DP-MB311EU Operating Instructions Manual page 79

Feature Code
Web fax preview #450
access code
Fax receive notify #451
Fax to email #452
address setting
All received fax #458
erase
Set fax features to #459
default
Selection
To set the web fax preview access code.
1. MtN A MBNM4NM5NM0N A MOKN
2. Enter the password (feature #155 on page 69). A MOKN
3. Enter the web fax preview access code, up to 8 characters, using the English
alphabet and numbers (see page 53 for character entry).
R The following symbols can also be entered using M0N or M1N.
! @ # $ % ^ & ' ) ( . - _ { }
4. MOKN A MtN
When "ON" is selected, the computer connected to your unit using USB/LAN will
receive a notification when a fax document is received.
M0N "OFF" (default)
M1N "ON"
Note:
R When connecting to the LAN: Register computers to which fax reception
notifications will be sent through the web browser interface (page 90).
If you wish to transfer a received fax document to desired email address, activate
this feature (page 64).
M0N "OFF" (default)
M1N "ON"
To erase all received fax memory.
R Disconnect the following cables before activating this feature.
– Telephone line cord
– USB cable
– LAN cable
M0N "NO" (default)
M1N "YES"
1. MtN A MBNM4NM5NM8N
2. M1N A "YES" A MOKN A MOKN A MtN
To reset fax features to their default settings.
M0N "NO" (default)
M1N "YES"
1. MtN A MBNM4NM5NM9N
2. M1N A "YES" A MOKN A MOKN A MtN
10. Programmable Features
79