Using The Unit With An Answering Machine; Receive Polling (Retrieving A Fax Placed On Another Fax Machine) - Panasonic DP-MB311EU Operating Instructions Manual

Multi-function printer
Table of Contents

Advertisement

9. Fax
9.6 Using the unit with an
answering machine
9.6.1 Setting up the unit and an answering
machine
1
Connect the answering machine (A).
R An answering machine is not supplied. The
illustration is just an example.
R Please purchase an extension telephone adaptor
(for UK only).
R Remove the stopper (B) if attached.
R To a single telephone line (C)
*1
A
*1 For countries other than France and Belgium
only
*2 For France only
*3 For Belgium only
2
Set the number of rings on the answering machine to
4 rings or less.
R This will allow the answering machine to answer
the call first.
3
Record a greeting message on the answering
machine.
4
Activate the answering machine.
5
Set the unit to the desired receiving mode (page 60).
R If you set to FAX ONLY mode, change the ring
count in FAX ONLY mode to more than 4
(feature #210 on page 70).
62
B
*2
C
A
*3
C
A
6
Make sure each of the following is unique:
– the remote access code of the answering
machine
– the fax activation code (feature #434 on
page 77)
Note:
R If the call is a phone call, the answering machine will
record voice messages.
If a fax calling tone is detected, the fax machine will
receive a fax automatically.
R Regarding the remote access code for the answering
machine, see the operating instructions of the
answering machine.
Receiving a voice message and fax document in one
call
The caller can leave a voice message and send a fax
document during the same call. Inform the caller of the
following procedure beforehand.
1. The caller calls your unit.
R The answering machine will answer the call.
2. The caller can leave a message after the greeting
message.
3. The caller presses MGN MBN M9N (pre-selected fax
activation code).
R The unit will activate the fax function.
4. The caller presses the start button to send a
document.
Note:
R To use this feature, make sure remote fax activation
is turned ON (feature #434 on page 77). The fax
activation code can also be changed.
R If there is no room left in the memory of your
answering machine, the unit may not be able to
receive documents. See the operating instructions of
the answering machine and erase unnecessary
messages.
9.7 Receive polling (retrieving a
fax placed on another fax
machine)
This feature allows you to retrieve a document from
another compatible machine. Therefore you pay for the
call.
R Make sure that the other party's machine is ready for
your call.
R Make sure that no documents are fed into your unit's
automatic document feeder.
1
Press MtN repeatedly to display "POLLING". A
MOKN
2
Dial the fax number. A MxN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents