Change User-Defined Display Size; Save User Defined Screen; Back To Common Numeric Screen; Change View Mode - Fluke NORMA 4000 Operator's Manual

Change User-Defined Display Size

You can change the size of the numeric display in the user defined screen. You can select
between three sizes:
3
6
9
Press function key 3/6/9.
User defined values are shown in desired size.

Save User Defined Screen

Save the configuration settings by pressing the SAVE function key.
See details about saving a configuration in section "Save Configuration" in Chapter 7.

Back to Common Numeric Screen

Change View Mode

After having selected a channel and the relevant measured values, you have the option to
change to different view modes where the parameters are shown in the form of numerical
values, vector graphs or oscilloscope graphs.
Shop for Power Metering products online at:
Size
three numeric values, double size
six numeric values, common size (7 mm)
nine numeric values, with size 5 mm
The changing of the display size is done in a loop, every time you press the
function key 3/6/9.
You can change the size in the configuration menu and also in the
measurement menu.
•
Press function keys Back... or Esc
•
The recently used numeric screen is shown.
www.
Description
Note
PowerMeterStore
Measuring Process

Change View Mode

esn045.gif
8-15
1.877.766.5412
.com
8