Change Display Language And Phase Identifier; Working With Annotations - Fluke 1750/ET Operator's Manual

Change Display Language and Phase Identifier

Power View features a localized user interface for English, German, French, Spanish,
Chinese, and Italian. Select one of these languages and select your preference of phase
identifier as A, B, C or L1, L2, L3. A restart of Power View is required to apply these
changes.

Working with Annotations

Annotations are optional markers that can be inserted by the Recorder operator to flag a
particular point in the data when recording. They are usually inserted on using Power
View with the wireless PDA.
There are five types of annotations:
•
START annotation (green)
The START annotation can be used to signify where important data begins. For
example, the operator might want to establish a start annotation after having finished
all probe connections and instrument setup, to indicate that any preceding data was
preliminary.
Power Recorder
Setting Up the Recorder
azd142.bmp
azd137.bmp
45