Shop for Power Metering products online at:
1. Press function key Config.
The setup screen for harmonics configuration is displayed.
2. If the mode is not set to FFT, press Enter, select FFT and press Enter again.
3. Move the cursor to the column Freq and press Enter.
The popup list shows the available frequency ranges.
4. Select a value, using the cursor keys, and press Enter.
5. Press Esc to return to the measurement screen.
The frequency analysis is carried out up to the selected value, and the result is
displayed.
PowerMeterStore
www.
Measuring Process
Harmonic Analysis
esn106.eps
8-23
1.877.766.5412
.com
8