Table of Contents
Advertisement
Configuring Synchronization Options
Network operators can specify the type of synchronization operation to perform between the
primary and secondary CPMs after a change has been made to the configuration files or the boot
environment information contained in the boot options file (BOF).
Use the following CLI to configure the boot-env option:
CLI Syntax: config>system
Example
The following displays the configuration:
A:ALA-12>config>system# synchronize boot-env
A:ALA-12>config>system# show system synchronization
===================================================
Synchronization Information
===================================================
Synchronize Mode
Synchronize Status
Last Config Sync Time
Last Boot Env Sync Time : 2006/06/27 06:19:47
===================================================
A:ALA-12>config>system#
Use the following CLI to configure the config option:
CLI Syntax: config>system
Example
The following example displays the configuration.
A:ALA-12>config>system# synchronize config
A:ALA-12>config>system# show system synchronization
===================================================
Synchronization Information
===================================================
Synchronize Mode
Synchronize Status
Last Config Sync Time
Last Boot Env Sync Time : 2006/06/24 07:16:37
===================================================
A:ALA-12>config>system#
7950 SR OS Basic System Configuration Guide
synchronize {boot-env|config}
:
config>system# synchronize boot-env
: Boot Environment
: No synchronization
: 2006/06/27 06:19:47
synchronize {boot-env|config}
:
config>system# synchronize config
: Configuration
: No synchronization
: 2006/06/27 09:17:15
System Management
Page 295
Advertisement
Table of Contents
