Table of Contents
Advertisement
Display-config
Post-Boot Configuration Extension Files
Two post-boot configuration extension files are supported and are triggered when either a
successful or failed boot configuration file is processed. The commands specify URLs for the CLI
scripts to be run following the completion of the boot-up configuration. A URL must be specified
or no action is taken. The commands are persistent between router (re)boots and are included in
the configuration saves (
CLI Syntax: config>system
Example
The following example displays the command output:
A:ALA-12>config>system# info
#------------------------------------------
echo "System Configuration"
#------------------------------------------
..
----------------------------------------------
A:ALA-12>config>system#
Page 304
admin>save
boot-bad-exec file-url
boot-good-exec file-url
:
config>system# boot-bad-exec ftp://test:test@192.168.xx.xxx/./
fail.cfg
config>system# boot-good-exec ftp://test:test@192.168.xx.xxx/./
ok.cfg
name "ALA-12"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
config-backup 7
boot-good-exec "ftp://test:test@192.168.xx.xxx/./ok.cfg"
boot-bad-exec "ftp://test:test@192.168.xx.xxx/./fail.cfg"
lacp-system-priority 1
sync-if-timing
begin
ref-order ref1 ref2 bits
).
7950 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
