Table of Contents
Advertisement
System Management Parameters
System management commands allow you to configure basic system management functions such
as the system name, the router's location and coordinates, and CLLI code as well as time zones,
Network Time Protocol (NTP), Simple Network Time Protocol (SNTP) properties, CRON and
synchronization properties.
It is possible to query the DNS server for IPv6 addresses. By default the DNS names are queried
for A-records only (address-preference is IPv4-only). If the address-preference is set to IPv6 first,
the DNS server will be queried for AAAA-records first, and if there is no successful reply, then A-
records.
System Information
System information components include:
•
•
•
•
•
System Name
The system name is the MIB II (RFC 1907, Management Information Base for Version 2 of the
Simple Network Management Protocol (SNMPv2)) sysName object. By convention, this text
string is the node's fully-qualified domain name. The system name can be any ASCII printable
text string of up to 32 characters.
System Contact
The system contact is the MIB II sysContact object. By convention, this text string is a textual
identification of the contact person for this managed node, together with information on how to
contact this person.The system contact can be any ASCII printable text string of up to 80
characters.
7950 SR OS Basic System Configuration Guide
System Name on page 223
System Contact on page 223
System Location on page 224
System Coordinates on page 224
Naming Objects on page 224
System Management
Page 223
Advertisement
Table of Contents
