Configuring Synchronization and Redundancy
•
•
•
•
Configuring Synchronization
The switchover-exec command specifies the location and name of the CLI script file executed
following a redundancy switchover from the previously active card.
CLI Syntax: admin>redundancy
CLI Syntax: config>system
7950 SR OS Basic System Configuration Guide
Configuring Synchronization on page 293
Configuring Manual Synchronization on page 294
Forcing a Switchover on page 294
Configuring Synchronization Options on page 295
synchronize {boot-env|config}
switchover-exec file-url
System Management
Page 293