Table of Contents
Advertisement
Service Management Tasks
Saving a Configuration to a Different Filename
Save the current configuration with a unique filename to have additional backup copies and to edit
parameters with a text editor. You can save your current configuration to an ASCII file.
Use either of the following CLI syntax to save a configuration to a different location:
CLI Syntax: bof# save [cflash-id]
Example
or
CLI Syntax: admin# save [file-url] [detail] [index]
Example
Rebooting
When an admin>reboot command is issued, CPM are rebooted as well as the XMAs and XCMs.
Changes are lost unless the configuration is saved. Use the admin>save file-url command to save
the current configuration. If no command line options are specified, the user is prompted to con-
firm the reboot operation.
Use the following CLI syntax to reboot:
CLI Syntax: admin# reboot[active|standby] [now]
Example
All rights reserved. All use is subject to applicable
license agreements.
....
Page 198
:
A:ALA-1# bof
A:ALA-1>bof# save cf:
A:ALA-1>bof#
:
A:ALA-1>admin# save cf:\testABC.cfg
Saving config.# Saved to cf:\testABC.cfg
... complete
A:ALA-1#
:
A:ALA-1>admin# reboot
A:DutA>admin# reboot
Are you sure you want to reboot (y/n)? y
Resetting...OK
Alcatel 7xxx Boot ROM. Copyright 2000-2007 Alcatel-Lucent.
7950 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
