System Information Parameters - Alcatel-Lucent 7950 XRS Series Configuration Manual

System Information Parameters

Name
Use the
string. Only one system name can be configured, if multiple system names are configured the last
one encountered overwrites the previous entry. Use the following CLI syntax to configure the
system name:
CLI Syntax: config>system
Example
The following example displays the system name:
sysName@domain>config>system# info
#------------------------------------------
echo "System Configuration "
#------------------------------------------
. . .
----------------------------------------------
sysName@domain>config>system#
Contact
Use the
other administrative entity.
CLI Syntax: config>system
Example
7950 SR OS Basic System Configuration Guide
em command to configure a name for the device. The name is used in the prompt
syst
name system-name
:
alcatel>config>system# name ALA-12
name "ALA-12"
exit
command to specify the name of a system administrator, IT staff member, or
contact
contact contact-name
:
config>system# contact "Fred Information Technology"
System Management
Page 265